Replace the Battery in a Second Generation iPod Touch

2nd generation ipod touch's are acknowledged to have troubles with the batteries keeping a cost. But Apple failed to make it effortless to exchange the battery. The moment an ipod is exterior the guarantee period of time, changing the battery gets your situation. Changing the battery will demand endurance and instruments to take away the back again of the ipod. Acquire your time replacing the battery to prevent harmful the ipod.

Items You may Demand

New battery Sharp flat instrument Modest Phillips screwdriver

Utilize a sharp instrument to get started to take away and loosen the LCD display screen from the back again of the ipod. A sharp scalpel or Modest flathead screwdriver might perform. Gently insert the sharp edge into the sides of the LCD display screen. Slide the instrument close to the edges of the LCD display screen. Keep on the method about the sides of the LCD display until finally the display screen arrives free of charge. You are going to demand to go about the ipod a handful of occasions just before it releases. Endurance will be your pal in this procedure.

Pull the display covering totally free from the ipod casing. Search to the upper proper corner and gently get rid of the cable keeping the display screen covering in spot.

Consider the Tiny Phillips screwdriver and unscrew the screw positioned in the upper left corner.

Gently apply the device to eliminate the LCD display screen. The LCD display screen is not screwed down but is held down with tape and connected at the top rated of the ipod with a ribbon cable. You may call for to pull the display screen out and utilize some force to the bottom of the display screen and pull it from the tape keeping it in location. The moment lifted out, flip it toward the best. You can depart the display attached to the ribbon cable.

Take away the 7 screws keeping the battery in location. Apply your prying instrument to gently pry up the metal plate. The plate is even now clipped in and You may require to apply the device to lift the plate up. When you eliminate the plate, unhook the LCD display screen from the ribbon cable and lay it gently on the table.

Peel off the adhesive strips that maintain the battery in location. Lift the battery out of location and insert the new battery. Your new battery really should arrive with two adhesive strips. Peel off the paper prior to inserting the battery so the battery will stick into area.

Reverse the measures to set your ipod touch back again jointly.