Thursday, June 2, 2011

Take Apart an iPod Touch Screen

With its smooth touch-display LCD, the ipod Touch is one particular of the most higher-tech private media gamers on the market place. But since its display screen is so delicate, you can simply crack or break it. Luckily, you can get rid of the display oneself and prevent an high-priced restore bill.

Items You may Will need

    Circumstance opener instrument Modest Phillips screwdriver

    Insert the suggestion of your plastic pry device in the gap amongst the front of the ipod Touch and the back again panel. A Situation opener device can be acquired from any electronics store.

    Operate your way gently all around the sides of the Touch right up until the two halves separate. Set the back again panel apart.

    Lift the substantial square battery from the front ipod housing and lay it down to the side of the ipod. Be watchful as it is even now related to the ipod by means of a connector ribbon on its bottom corner. Use your Phillips screwdriver to get rid of the solitary screw keeping the cable in location on the side of the ipod housing. Then set the battery apart.

    Get rid of the strip of black tape from the bottom of the Touch housing to expose a few screws. Use your screwdriver to eliminate them. Then take away the rectangular metal panel from the bottom of the system.

    Find the display ribbon tab on the bottom left side of the ipod housing. This is a Little black tab that retains the prolonged thin display screen ribbon in spot. Use the suggestion of your screwdriver to pop this tab up.

    Use your screwdriver to get rid of two Tiny screws at the top rated of the housing. Then take away the other ribbon cable that connects at the leading of the housing by gently pulling it up.

    Get rid of the rectangular metal board from the best of the tool and set it up coming to the ipod. Be cautious as the board is nonetheless linked by a lengthy ribbon cable.

    Use your screwdriver to eliminate the sixteen screws (8 on each and every side) on the sides of the ipod housing. Then pop the LCD display screen gently out of the housing. You have now taken aside your Touch's display screen and eliminated it from the tool.

No comments:

Post a Comment