Repair Broken Glass on an iPod Touch 2G

The 2nd generation (2G) edition of the ipod Touch does not have any safety for its front-mounted glass display. A damaged glass requirements to be changed instantly. This will require a partial dis-assembly of the Touch, along with a substitute glass from an ipod provide shop.

Issues You will Require

Bath towel ipod opening device Phillips jeweler's screwdriver Flat-edged jeweler's screwdriver Alternative glass Glue stick

Location a bath towel on the table. Slide the change on the Touch's upper correct corner so that the orange stripe can be observed--this locks the Touch. Area the Touch on the bath towel with the bottom dock connector dealing with you.

Insert the suggestion of the ipod opening instrument into the seam in between the glass frame on the front and the back again scenario at the upper left corner of the Touch. Slide the suggestion across the width of the Touch to loosen the front and back again situation from each and every other. Slide the suggestion down the duration of the left facet until finally you achieve the bottom. Slide the suggestion across the width of the bottom till you attain the appropriate aspect. Slide the suggestion up the duration of the correct facet until finally you achieve the leading. Eliminate the suggestion of the ipod opening device from the seam amongst the glass frame and the back again scenario.

Insert the suggestion of the flat-edged jeweler's screwdriver into the seam on the appropriate facet of the Touch in between the glass frame and the back again circumstance. Lift up on the suggestion to increase the aspect of the glass frame. Grip the glass frame's edge and pull it up and toward the left.

Insert the suggestion of the flat-edged jeweler's screwdriver beneath the connector plug in the upper left corner of the back again situation. Lift up on the suggestion to release the plug from the connection. Take away the glass frame from the back again situation. Push the connector plug toward the top rated of the back again circumstance with the suggestion of the flat-edged jeweler's screwdriver.

Rotate the Touch so that the dock connector is going through appropriate. Insert the suggestion of the flat-edged jeweler's screwdriver into seam amongst the front mounted glass and the glass frame on the upper left corner. Slide the suggestion down the duration of the glass frame right up until you arrive to the bottom. Repeat this from the upper appropriate corner of the glass frame.

Get rid of the screw from the upper left corner of the glass frame with the Phillips jeweler's screwdriver. Insert the suggestion of the flat-edged jeweler's screwdriver amongst the glass and glass frame on the left aspect. Lift up on the suggestion to elevate the glass frame. Grip the left edge of the glass frame and flip it toward the correct.

Take away the screws from the best and bottom of the metal plate on the back again situation that can now be witnessed with the Phillips jeweler's screwdriver.

Insert the suggestion of the flat-edged jeweler's screwdriver beneath the LCD cable's plug in the center of the left facet of the back again scenario. Lift up on the suggestion to release the plug from the connection. Pull the metal plate off the back again scenario. Location the glass frame horizontally on the bath towel.

Insert the suggestion of the flat-edged jeweler's screwdriver into the seam amongst the glass and the glass frame at the upper left corner. Slide the suggestion across the width of the glass to loosen it from the glass frame. Repeat this method on the sides and bottom to loosen the glass from the glass frame.

Insert the suggestion of the flat-edged jeweler's screwdriver into the seam in between the glass and the glass frame at the center of the left aspect. Lift up on the suggestion to boost the glass from the glass frame. Grip the glass on its left facet and Eliminate it from the glass frame. Dispose of the glass effectively.

Utilize glue from a glue stick to the inside of edges of the glass frame. Area the substitute glass on the glass frame. Push down on the glass lightly to protected it into the front of the glass frame. Permit the glue set for ten minutes prior to proceeding.

Insert the LCD plug into the connector on the center of the back again circumstance's left aspect. Reattach the screw on the upper left corner of the glass frame. Area the metal plate back again on the back again scenario. Reattach the screws.

Area the glass frame back again on the back again circumstance. Press down on the top rated, bottom, left and appropriate sides of the glass frame to re-seat it to the back again circumstance. Slide the swap at the upper appropriate corner of the Touch so that the orange stripe is no lengthier visible.

Put Movies on an iPod Nano Fourth Generation

The fourth generation (4G) ipod Nano is 1 of the numerous iPods that supports video clip playback, and is in a position to play films that are in the MP4 video clip format discovered in the iTunes Shop. In purchase to include a bought film to the ipod Nano you should sync it to the gadget in iTunes, which arrives with the ipod Nano on an set up CD and is also accessible on-line as a download on the Apple website. For films that are not bought in iTunes you should initial convert it in iTunes, followed by syncing it to the ipod Nano.

Issues You will Require

iTunes seven.0 or later on ipod USB cable iTunes account

Plug the ipod USB cable into an empty USB port on your pc, and plug the other finish into the bottom of your ipod Nano.

Double-click on the iTunes icon on your Computer desktop or solitary click on the iTunes icon on your Mac's display if it does not operate immediately following plugging in the ipod Nano.

Click on the ipod Nano tab found beneath the "Gadgets" area in the iTunes supply list. Click on the "Videos" tab in the primary iTunes window, and examine the box subsequent to "Sync Films."

Choose "Immediately add all videos" or examine the box subsequent to the films you want to include.

Click on the "Use" button at the bottom of the iTunes system window, and wait around for the film to sync to your ipod Nano.

Click on the "Eject" button up coming to the ipod Nano tab in the iTunes supply list, and physically unplug the ipod Nano from your pc.

Get a Software Update for an iPod touch

Apple usually releases application patches and protection updates for its ipod transportable new music gamers, so it can be a very good notion to from time to time check out for offered downloads. Apple presents update downloads by way of its iTunes media software. The moment the unit is related to your laptop or computer, you can accessibility your ipod touch via iTunes and examine for updates that can be utilized to your gadget.

Points You are going to Want

USB cable

Connect your ipod touch to your pc through the USB cable that arrived with the system.

Operate the iTunes software program.

Click on the accessibility for your ipod touch unit in the menu on the left aspect of the iTunes system window.

Click on the "Summary" tab at the top of the window and Click on "Verify for Update." iTunes will research for and set up accessible software program updates for your ipod touch unit.

Turn ON and OFF VoiceOver on iPod Shuffle (3rd generation)

Apple's 3rd generation ipod Shuffle unveiled a characteristic new to most transportable songs gamers. The ipod Shuffle 3rd generation not only arrives in sleeker and slimmer layout however has the ability to voice-above the title of new music, artists, or playlists also.

If you locate this attribute valuable to you, here is how you flip on and off VoiceOver on ipod Shuffle 3rd generation.

Points You are going to Want

personal computer ipod Shuffle (3rd generation)

If your ipod Shuffle (3rd generation) is new, iTunes will give you the alternative to permit the VoiceOver when you plug it into the laptop or computer the very first time. If you take place to skip it when you 1st setup your ipod Shuffle then go to the following phase.

In iTunes, click on the ipod Shuffle from the "Units" and then go to the "Summary" tab. On the "Alternatives", verify the box that says "Help VoiceOver" below Voice Feedback.

If your ipod Shuffle does not have the VoiceOver kit computer software set up however, iTunes will immediately check out and set up the most recent application. Click on "Up coming" when the Software program update window seems and then click on "Concur" on the license arrangement.

Right after the set up, iTunes will instantly make VoiceOver messages for your ipod Shuffle (3rd generation). iTunes will synchronize the created VoiceOver messages with your ipod Shuffle. When you disconnect your ipod Shuffle, the VoiceOver is now turned ON.

There are 19 diverse languages to decide on from which you can as well setup in the "Summary" tab underneath Voice Feedback.

To flip OFF the VoiceOver, basically plug the ipod Shuffle into your pc and go to the "Summary" tab yet again. Examine the "Allow VoiceOver" box to disable the function.

Take Apart an iPod Touch Screen

With its smooth touch-display LCD, the ipod Touch is one particular of the most higher-tech private media gamers on the market place. But since its display screen is so delicate, you can simply crack or break it. Luckily, you can get rid of the display oneself and prevent an high-priced restore bill.

Items You may Will need

Circumstance opener instrument Modest Phillips screwdriver

Insert the suggestion of your plastic pry device in the gap amongst the front of the ipod Touch and the back again panel. A Situation opener device can be acquired from any electronics store.

Operate your way gently all around the sides of the Touch right up until the two halves separate. Set the back again panel apart.

Lift the substantial square battery from the front ipod housing and lay it down to the side of the ipod. Be watchful as it is even now related to the ipod by means of a connector ribbon on its bottom corner. Use your Phillips screwdriver to get rid of the solitary screw keeping the cable in location on the side of the ipod housing. Then set the battery apart.

Get rid of the strip of black tape from the bottom of the Touch housing to expose a few screws. Use your screwdriver to eliminate them. Then take away the rectangular metal panel from the bottom of the system.

Find the display ribbon tab on the bottom left side of the ipod housing. This is a Little black tab that retains the prolonged thin display screen ribbon in spot. Use the suggestion of your screwdriver to pop this tab up.

Use your screwdriver to get rid of two Tiny screws at the top rated of the housing. Then take away the other ribbon cable that connects at the leading of the housing by gently pulling it up.

Get rid of the rectangular metal board from the best of the tool and set it up coming to the ipod. Be cautious as the board is nonetheless linked by a lengthy ribbon cable.

Use your screwdriver to eliminate the sixteen screws (8 on each and every side) on the sides of the ipod housing. Then pop the LCD display screen gently out of the housing. You have now taken aside your Touch's display screen and eliminated it from the tool.

How Do I Know Which Generation iPod I Have?

Every single ipod has equally a product and a generation. The product is the form of ipod -- the ipod Touch, the ipod Nano, the ipod Shuffle -- people are all versions. Every single product has many generations. For example, if you purchased an ipod Shuffle when it was 1st launched, you would have a 1st generation ipod Shuffle. If you purchased an ipod Shuffle following Apple up to date the design, you might have a 2nd or 3rd generation ipod Shuffle.

Appear at your ipod to figure out what design you have. Ideally, you will nonetheless have the owner's manual that will inform you. If not, you will have to go to Apple's ipod identification web site. You can figure out your design by searching at the functions of your ipod. For instance, if your ipod has a multi-touch show and 64 GB capability, you are utilizing an ipod Touch.

Visit Apple's ipod Identification web site, connected in the resource area. Click on on the design title of the ipod you are utilizing. This will consider you to a new web page.

Evaluate your ipod to the numerous generations outlined. Appear at the storage capability of your ipod, the colour of the casing, and Evaluate the photos of the numerous ipod generations to your ipod. Also take the particulars introduced by Apple. For example, the distinction in between a 2nd generation and a third generation ipod Touch is that the 2nd generation ipod Touch design quantity is A1288, whilst a third generation carries a product quantity of A1318. An additional instance would be the 5th generation ipod Nano, which has a taller display in contrast to the prior generations. You can be certain of a right identification when your ipod matches all of the specs outlined on Apple's web site -- storage capability, colour, dimensions, and seems to be the identical as the photograph furnished by Apple.

Work an iPod Touch Second Generation

One particular of the positive aspects the the ipod Touch 2nd generation has above other types of iPods is that even even though this is the most sophisticated ipod, it is also incredibly straightforward to use. There are several distinct points that can be completed on an ipod Touch. Although, there are a handful of basic points that each particular person who would like to perform an ipod Touch need to know.

Click on on the "Settings" icon on the ipod to accessibility the World wide web on an ipod Touch. This is a icon on the residence display screen that seems like a tiny gear. When the following web page opens, press the "Wi-Fi" button to see if you are in an obtainable network location. The obtainable networks will be exhibited. Press on the identify of the network you want to connect to. Press the residence button on the bottom of the ipod. Press the "Safari" icon to browse the World wide web.

Push the "Digital camera" icon that is positioned on the residence display screen to consider a picture with the ipod Touch. The display will turn out to be a viewfinder. Line up your picture and push the button that seems like a Digital camera on the bottom of the display screen. To evaluation pictures, press the icon on the decrease left-hand side of the display screen.

Click on on the "App Shop" icon to include apps to the ipod Touch. To do this stage, you should be in the array of a Wi-Fi network and be linked to it. When the App Shop opens, use the class choices or the research perform to find the software you want. Press the "Set up" button, and the new software will seem on the display with all of your other apps.

Maintain your finger on the display to delete an software. Following a handful of seconds, you can release your finger. All of the software icons on the web page will seem with a tiny X on their leading left corners. Find the software you want to delete and push the X button. The ipod Touch will display screen a display screen asking if you are certain. Choose "Delete."

Click on on the "Songs" button on the bottom of the display screen to pay attention to saved Songs or observe video clips. When the following display screen seems, appear at the backlinks on the bottom of the web page. You can Click on on "Playlists," "Podcasts," Music" or "Movies." Following you have picked One particular of these classes, Select the file you want to observe or pay attention to and it will commence to play.